Patriot 4WD L4-2.4L (2009)
11. 2.4L Engine with All-Wheel-Drive - Position the pressure hose routing clamp (2) at the exhaust manifold and install the mounting bolt (1). Tighten
the bolt to 9 Nm (80 in. lbs.).
12. Fill and bleed the power steering system. See: Service and Repair/Power Steering System Bleeding
13. Check for leaks.
14. Install the engine appearance cover.
Return Hose
INSTALLATION
1. Install the power steering return hose (7) into the engine compartment.
2. Install the return hose routing clamp screw (1) securing the return hose (7) to the strut tower.
3. Install the return hose onto the cooler tubes (5) and install the hose clamps (6).
4. Raise and support the vehicle. See: Wheels and Tires/Vehicle Lifting/Service and Repair
5. Install the screw (2) securing the return hose to the frame rail. Tighten the screw to 19 Nm (14 ft. lbs.).
