Patriot 4WD L4-2.4L (2009)
20. Remove the steering wheel holder.
21. Verify the front wheels of vehicle are in the STRAIGHT-AHEAD position.
22. Center the intermediate shaft (2) over the steering gear pinion shaft (4), lining up the ends, then slide the intermediate shaft onto the steering gear
pinion shaft.
23. From center, rotate the steering wheel to the right approximately 90° or until the intermediate shaft coupling bolt (3) can be easily installed.
24. Install the intermediate shaft coupling bolt (3). Tighten the bolt to 42 Nm (31 ft. lbs.).
25. Reposition the floor carpet (1) in place.
26. Straighten the steering wheel to STRAIGHT-AHEAD position.
27. Fill and bleed the power steering system. See: Service and Repair/Power Steering System Bleeding
28. Check for fluid leaks.
29. Adjust front wheel toe as necessary. See: Alignment/Service and Repair/Wheel Alignment Procedures