Patriot 4WD L4-2.4L (2009)
Cross-Member: Service and Repair
Crossmember - Installation
Front Fore and Aft
INSTALLATION
1. Install the fore/aft crossmember and install the engine anti-roll mount (3) through bolt (2).
2. Install the bolts (1, 2 and 3), and tighten using the following sequence:
a. Tighten the bolt (1) to 78 Nm (58 ft. lbs.).
b. Tighten the bolt (2) to 78 Nm (58 ft. lbs.).
c. Tighten the bolt (3) to 129 Nm (95 ft. lbs.).