Patriot 4WD L4-2.4L (2009)
21. Install the rear drive module (1), See: Transmission and Drivetrain/Differential Assembly/Service and Repair/Removal and Replacement/Rear
Driveline Module/Installation.
22. Install the wheel speed sensor back, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Wheel Speed Sensor/Service
and Repair/Wheel Speed Sensor - Installation.
23. Position the brake lines (3) back into place, connect the clips (2) and install the bolts (1).
24. Tighten the bolts to 15 Nm (11 ft. lbs.).
25. Position the brake lines (1) back into place, and install the bolts (2).
26. Tighten the bolts to 23 Nm (17 ft. lbs.).
27. Install the brake cable (2) onto the backing plate (3) and install the hair pin clip (1).
