Patriot 4WD L4-2.4L (2009)
Clutch Master Cylinder: Service and Repair
Clutch Master Cylinder - Installation
INSTALLATION
CAUTION: Brake fluid will damage painted surfaces. If brake fluid is spilled on any painted surfaces, wash it off immediately with water.
1. Install clutch master cylinder body (4) to the clutch pedal bracket assembly and 1/4 turn counter clockwise to secure.
2. Insert hydraulic tube (6) into master cylinder pressure-line connector (5) and install retaining clip.
3. Connect clutch master cylinder rod (3) to clutch pedal pin. An audible "click" should be heard.
