Patriot 4WD L4-2.4L (2009)
INSTALLATION
1. To install the control valve body assembly on to the transaxle case, fabricate a rod to set the pulley ratio linkage as shown. (1) 2 mm (0.08 in.)
Diameter, (2) 80 mm (3 in.) long, (3) 30 mm (1 in.) long, (4) 50 mm (2 in.) long.
2. Install the rod into the linkage stopper hole (5) of the control valve assembly and secure under bolt head (3).
3. This sets the pulley ratio linkage (1) in position on the valve body (2).
