Patriot 4WD L4-2.4L (2009)
9. Install and tighten the mounting bolts (1) and (7) of the control valve body assembly to 8 Nm (70 in. lbs).
10. Remove bolt (3) and remove the rod used to set the pulley ratio linkage (4).
11. Install bolt (3) and tighten to 8 Nm (70 in. lbs).
12. Install the manual lever (1) onto the manual shaft. Install and tighten the mounting nut to 22 Nm (16 in. lbs.).
13. Install the oil strainer bracket (1) onto the control valve assembly. Install and tighten the mounting bolts to 8 Nm (70 in. lbs.).onto the control
valve assembly. Install and tighten the mounting bolts to 8 Nm (70 in. lbs.).
