Patriot 4WD L4-2.4L (2009)
4. Allow end of adhesive bead (1) to run out parallel to the start of the bead and smooth ends flush.
5. Lift liftgate glass into place in the center of the liftgate opening and line up the guide pins (4) to the holes in the liftgate glass frame.
6. Carefully lay down the liftgate glass and press on.
CAUTION: It is no longer possible to move the liftgate glass after installation. The liftgate glass should never be pressed into place by more
than one person, because the liftgate glass can break if pressed simultaneously on both sides.
CAUTION: Roll down the left and right front door glass and open the rear glass slider (if available) before installing liftgate glass to avoid
pressurizing the passenger compartment if a door is slammed before urethane is cured. Water leaks can result.
