Patriot 4WD L4-2.4L (2009)
NOTE: Compass shown, Patriot similar.
NOTE: Adhesive locations are measured from the center of the bead to the edge of the glass.
2. Apply bead (5) of adhesive with a triangular nozzle directly to the quarter glass seal starting at bottom in center of the quarter glass.
3. Locate the bead (5) of adhesive onto the primed glass surface (2) as indicated.
CAUTION: Always apply bead of adhesive to the quarter glass. Always install the quarter glass within 5 minutes after applying adhesive.
4. Allow end of adhesive bead (1) to run out parallel to the start of the bead and smooth ends flush.
