Patriot 4WD L4-2.4L VIN W (2007)
9. Connect the wiring harness connector (1) to the brake fluid level switch (2).
WARNING: A reservoir blocker must be installed on the master cylinder brake fluid reservoir. Failure to install the reservoir blocker
can result in fire in the event of an accident, resulting in serious or fatal injury.
10. If not present, a reservoir blocker (1) must be installed on the fluid reservoir (2). The blocker can be removed from the original reservoir by
releasing the retaining tab (3) and opening the blocker. To install the blocker, encircle the reservoir neck with the blocker, close the blocker,
snapping the retaining tab into place. Make sure the blocker is securely latched.
11. Connect the negative (ground) cable on the battery.
12. Fill the master cylinder reservoir to the proper level.
WARNING: Be certain a firm brake pedal is achieved prior to attempting to operate the vehicle. If a firm brake pedal cannot be
achieved, bleed the brake hydraulic system and check for leaks.
