Patriot 4WD L4-2.4L VIN W (2007)
Wheel Speed Sensor: Service and Repair
Front Wheel Speed
Removal
REMOVAL
NOTE: Refer to Warnings and Cautions.
1. Open the hood.
2. Disconnect the wheel speed sensor cable connector (2) from the wiring harness connector (3) on top of the frame rail (1) to the inside of the strut
tower.
3. Raise and support the vehicle.
4. Remove the grommet (1) from the hole in the body (7) and pull the wheel speed sensor cable out of the hole.
5. Remove the speed sensor cable routing clip (2) from the outside frame rail (6).
6. Remove the screw fastening the cable routing clamp (3) to the outside frame rail (6).