Patriot 4WD L4-2.4L VIN W (2007)
Exhaust Pipe/Muffler Hanger: Service and Repair
Installation
INSTALLATION
1. Position isolator bracket to underbody and install attaching screws. Tighten bracket screws to frame rail to 8.5 Nm (75 in. lbs.) and bracket screws
to the rear panel to 3.7 Nm (33 in. lbs.).
2. Connect isolator to exhaust system component.
3. Start the engine and inspect for exhaust leaks. Repair exhaust leaks as necessary.
4. Check the exhaust system for contact with the body panels. Make the necessary adjustments, if needed.
