Patriot 4WD L4-2.4L VIN W (2007)
Tire Pressure Sensor: Service and Repair
Installation
INSTALLATION
NOTE: Anytime a TPM sensor is reused on a wheel, it is necessary to install a new sensor-to-wheel seal (2), metal washer (1) and valve stem nut
(3), to ensure proper sealing around the sensor valve stem (6).
1. Wipe the area clean around the sensor/valve stem mounting hole in the wheel (5). Make sure the surface of the wheel is not damaged.
CAUTION: To avoid damaging the sensor antenna strap (1), hold pressure against the rear of the metal valve stem (2) while the sensor is
inserted through the wheel mounting hole and the nut is installed.
