Patriot 4WD L4-2.4L VIN W (2007)
8. Reinstall the trim onto the inside of both upper D-pillars.
9. Reinstall the flashlight into the cargo lamp housing.
10. Reconnect the battery negative cable.
Lamp - Without Flashlight Feature
LAMP - WITHOUT FLASHLIGHT FEATURE
NOTE: There are two types of cargo lamps available in this vehicle; one with and one without a removable flashlight feature.
1. Position the cargo lamp unit (1) to the mounting hole in the headliner.
2. Reconnect the wire harness connector to the connector receptacle on the back of the lamp housing.
3. Insert the fixed retainer (4) on the notched end (5) of the lamp housing up into one side of the mounting hole in the headliner.
4. Slide the notched end of the housing into the mounting hole far enough to engage the lens hinge/retainer (3) into the opposite side of the hole in
the headliner.
5. Gently and evenly press the lens hinge/retainer end of the lamp into the mounting hole until the bezel of the lamp housing is flush with the
headliner.
6. Swing the notched end of the lamp lens (2) into position against the lamp housing, then press on the lens firmly and evenly until it snaps into the
housing.
7. Reconnect the battery negative cable.
