Patriot 4WD L4-2.4L VIN W (2007)
2. Remove the upper trim (4) from the inside of the right D-pillar.
3. Pull the second row center seat belt latch plate and lower anchor (5) through the seat belt opening in the right upper D-pillar trim.
4. Remove the screw (1) that secures the seat belt turning loop to the right upper D-pillar.
5. Remove the screw (3) that secures the retractor (2) lower bracket to the right quarter inner panel.
6. Remove the second row center seat belt and retractor unit from the right quarter inner panel.
Second Row Outboard
SECOND ROW OUTBOARD
WARNING: To avoid serious or fatal injury during and following any seat belt or child restraint anchor service, carefully inspect all seat belts,
buckles, mounting hardware, retractors, tether straps, and anchors for proper installation, operation, or damage. Replace any belt that is cut,
frayed, or torn. Straighten any belt that is twisted. Tighten any loose fasteners. Replace any belt that has a damaged or ineffective buckle or
retractor. Replace any belt that has a bent or damaged latch plate or anchor plate. Replace any child restraint anchor or the unit to which the
anchor is integral that has been bent or damaged. Never attempt to repair a seat belt or child restraint component. Always replace damaged or
ineffective seat belt and child restraint components with the correct, new and unused replacement parts listed in the DaimlerChrysler
Mopar(R) Parts Catalog.
NOTE: All seat belt retractors except the driver side front retractor include a switchable automatic locking mechanism.
1. Remove the rear seat cushion from the vehicle.
