Patriot 4WD L4-2.4L VIN W (2007)
Battery Cable: Service and Repair
Battery Cables - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Rotate the two retaining clips (3) and remove the air cleaner fresh air duct (2).
WARNING: The battery negative and positive cable polarity are different from the gasoline engine equipped vehicles to the diesel engine
equipped vehicles. Please note the location of the positive and negative cables prior to service of the battery or related components.
NOTE: Diesel battery shown, gasoline battery similar.
3. Remove the nut (2) securing the Totally Integrated Power Module (TIPM) cable (1) to the battery clamp stud (5).
4. Disconnect and isolate the battery negative cable then the positive cable (3).
