Patriot 4WD L4-2.4L VIN W (2007)
1. Bead dimensions should be approximately 9.5 mm (0.375 in) wide (4) by 12.7 mm (0.50 in) in height (1).
NOTE: Adhesive locations are measured from the center of the bead to the edge of the glass.
2. Apply bead (4) of adhesive with a triangular nozzle directly to the liftgate glass (1) starting at bottom in center of the liftgate glass.
3. Locate the bead (4) of adhesive onto the primed glass surface (2) as indicated.
CAUTION: Always apply bead of adhesive to the liftgate glass. Always install the liftgate glass within 5 minutes after applying adhesive.
