Patriot 4WD L4-2.4L VIN W (2007)
2. Apply four new spacers (2) to the A-pillars and place them evenly apart at the top and bottom.
3. Install the lower spacer assemblies (1) into the slotted holes and verify proper installation by pulling to make sure they are locked on.
NOTE: Lower spacers must be facing with the flat side upwards when installing into the slotted holes.
4. Position windshield (2) in center of windshield opening and resting on the side and lower spacers (2 & 3).
5. Adjust the lower spacers (3) as required, to obtain the specified roof gap tolerance by pushing on the side of the wedge and raising or lowering the
glass as necessary. For roof gap specifications, refer to the table Roof Gap Tolerances.
±±±±
