jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Transmission Control Systems > < Campaign - Transfer Case Will Not Shift|Page 2669
Page 3
background image

and trunnion assembly

Parts Return

Removed shift rod and trunnion assemblies must be returned to the Warranty Material Return Center.

Note:

See Warranty Policy and Procedure Manual, Chapter 6, Subsection H for complete recall claim processing and material return instructions.

Vehicle Not Available

If a vehicle is not available for this service for a known reason, let us know by filling out the pre-addressed Vehicle Disposition Form portion of the
Owner Recall Notification Form or describe the reason on a postcard and mail to:

Chrysler Corporation 416-15-19 Recall Coordination P.O. Box 1919 Detroit, Michigan 48231-9986

Following the above procedures will expedite the processing of your claim.

If you have any questions or need assistance in completing this action, please contact your Zone Service Office.

Owner Letter

CUSTOMER SATISFACTION NOTIFICATION - TRANSFER CASE SHIFT LEVER

Dear Jeep Vehicle Owner:

The satisfaction of our customers is very important to Chrysler. Because of this, we are requesting owners of certain 1990 model Jeep vehicles to return
them to their dealers for a special service. The service and required parts as described in this letter will be provided free of charge.

The service is needed to prevent the transfer case shift rod linkage from slipping due to a defective shift rod assembly. If this occurs, the transfer case
will not shift from its last engaged position when the shift lever is moved. To correct the condition, a new shift rod assembly must be installed.

Your Jeep, whose Vehicle Identification Number is shown on the enclosed form, requires this correction. Therefore, we ask that you make an
appointment with your dealer for the service without delay.

Your dealer will install a corrected shift rod assembly. The work will takeabout one-half hour to complete. However, additional time may be required
depending on how dealer appointments are scheduled and processed. To arrange for this important service:

^

Contact your dealer as soon as possible to schedule an appointment for the free installation.

^

Take the enclosed Owner Recall Notification Form with you at the time of your appointment and give ft to your dealer. The form shows the
identification number for the vehicle which requires the service.

If you have any problem obtaining the needed work, please contact the Chrysler Zone Service Office in your area. (It is listed under "Service Assistance"
in your Operator's Manual.) A Zone representative will arrange for prompt completion of the work on your vehicle.

We regret any inconvenience that this action may cause you. However, we believe that this special service will help to ensure your continuing
satisfaction with your Jeep vehicle.

Thank you for your attention to this important matter.

Transmission Control Systems > < Campaign - Transfer Case Will Not Shift|Page 2669