Wagoneer L6-242 4.0L VIN L FI (1989)
Door Latch Components
1. Install a new striker if necessary.
2. On models with power locks, attach the motor with new rivets or screws and nuts.
3. Install and connect the latch assembly.
4. Attach the latch screws. Tighten the screws to 9 Nm (7 ft-lbs) torque.
5. Install and connect the exterior door handle.
Removing/Installing Lock Cylinder
6. Install the lock cylinder and retaining clip.
7. Install the water dam sheet and trim panel.
8. Install the door access plug.
