Wagoneer L6-242 4.0L VIN L FI (1989)
Rear Door Window Glass: Service and Repair
REMOVAL
1. Lower the window.
2. Remove the window weatherstrip.
3. Remove the trim panel and water dam sheet.
Channel And Frame Screw Locations
4. Remove the stationary glass frame screws and rivet.
5. Remove the window channel screws.
6. Tilt the window channel and stationary glass forward and remove them from the door.
7. Remove the door glass stud nut.
8. Remove the window glass from the door.
INSTALLATION
1. Position the window glass in the door. Install and tighten the stud nut to 6 Nm (5 ft-lbs) torque.
2. Install the window channel and stationary glass in the door.
3. Install the window channel screws, rivet and the stationary glass frame screws. Tighten the screws to 6 Nm (5 ft-lbs) torque.
4. Install the window weatherstrip.
5. Install the water dam sheet and the trim panel.
