Wagoneer L6-242 4.0L VIN L FI (1989)
7. Remove the oil slinger from the crankshaft.
Fig. 6 Camshaft Sprocket Preload Bolt
8. Remove the tension spring and thrust pin from the preload bolt Fig. 6. Remove the camshaft sprocket retaining preload bolt and washer.
9. Remove the crankshaft sprocket, camshaft sprocket and timing chain as an assembly.
Installation of the timing chain with the timing marks on the crankshaft and camshaft sprockets properly aligned ensures correct valve timing. A
worn or stretched timing chain will adversely affect valve timing. If the timing chain deflects more than 12.7 mm (1/2 inch) replace it. The correct
timing chain has 48 pins. A chain with more than 48 pins will cause excessive slack.
