jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

ABOUT US
Throttle Valve Cable/Linkage, A/T|Adjustments|Page 2962 > < Throttle Position Sensor/Switch, A/T|Locations

Wagoneer L6-242 4.0L VIN L FI (1989)

Page 1
background image

Throttle Valve Cable/Linkage: Adjustments

1. Shift transmission into Park, shut engine off and raise hood.

Throttle Cable Components

2. Press cable release button.

Throttle Cable Adjustment

3. Push cable conduit back into cable sheath as far as possible.
4. Rotate lever on throttle body to wide open throttle position.  Cable will ratchet to correct adjustment point as lever is rotated.

Throttle Valve Cable/Linkage, A/T|Adjustments|Page 2962 > < Throttle Position Sensor/Switch, A/T|Locations