jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Front Door Panel|Service and Repair|Page 4616 > < Front Door Latch|Service and Repair|Page 4612
Page 1
background image

Front Door Panel: Service and Repair

REMOVAL

Removing/Installing Interior Latch Handle

1. Remove the interior door latch handle screws.
2. Move the door handle outward and disconnect the control rods. On models with power door locks, also disconnect the wire harness.
3. Remove the window crank handle or power window switch and bezel.
4. Remove the armrest lower retaining screws.

Removing/Installing Armrest

5. Swing the armrest downward to a vertical position for access to the upper retaining clip. the clip and pull the armrest straight out from the panel.

Front Door Panel|Service and Repair|Page 4616 > < Front Door Latch|Service and Repair|Page 4612