jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Interior Moulding / Trim|Service and Repair|Page 4678 > < Trunk / Liftgate Shock / Support|Service and Repair
Page 1
background image

Console: Service and Repair

PARKING BRAKE HANDLE TRIM COVER REMOVAL/INSTALLATION

1. Unclip the rear section of the trim cover and swing it up.

Removing/Installing Parking Brake Trim Cover

2. Drill out the cover push screws or rivets.
3. Remove the trim cover.
4. Attach the cover with new pop rivets.
5. Close the cover and snap it in place.

STANDARD CONSOLE REMOVAL

1. Remove the transmission gearshift lever handle. On models with automatic transmission, pull the handle straight up. On models with manual

transmission, loosen the lock nut and remove the shift knob.

Removing/Installing Console Screws

2. Remove the transmission and transfer case shift indicator bezels by prying upward to release them.

Interior Moulding / Trim|Service and Repair|Page 4678 > < Trunk / Liftgate Shock / Support|Service and Repair