Wagoneer L6-242 4.0L VIN M FI (1988)
Fig. 14 With A/C
11. Position drive belt to pulleys.
Fig. 5 P.S. Pump Rear Mounting Bolts - Typical
12. Tighten belt adjustment bolt D to the proper tension. Refer to Engine / Drive Belts, Mounts, Brackets and Accessories / Drive Belt /
Specifications / Mechanical.
See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Specifications
13. Tighten bolts A to 27 N.m (20 ft. lbs.) torque.
14. Tighten pivot bolt B to 27 N.m (20 ft. lbs.) torque.
15. Tighten locknut C to 27 N.m (20 ft. lbs.) torque.
16. After the power steering pump has been tightened, recheck belt tension.
17. Fill cooling system with coolant and check for leaks. Refer to Cooling System/Service and Repair.
See: Cooling System/Service and Repair
18. Connect battery cable to battery
19. Start and warm the engine. Check for leaks.
