Wagoneer L6-242 4.0L VIN M FI (1988)
d.
Push fuel tube into quick connect fitting until a "click" is heard (Figure 6).
e.
Verify that connection is secure by firmly pulling back on fuel tube. The tube should be locked in place.
f.
Attach the vacuum line bracket to secure the fuel line to the manifold.
31.
Connect all electrical and vacuum connections on the intake manifold.
32.
Connect the vacuum connector on the intake manifold and install it in the bracket.
33.
Install throttle cable, cruise control cable (if equipped), and transmission line pressure cable (if equipped).
34.
Install air cleaner assembly.
35.
Connect air inlet hose to throttle plate assembly.
36.
Raise vehicle on hoist.
37.
Loosen the exhaust bracket bolt on the bell housing. If necessary, replace the bracket with the provided bracket from the service kit. Loosen the
