Wagoneer L6-242 4.0L VIN M FI (1988)
Ball Joint: Service and Repair
Upper Ball Joint Replacement
Fig. 3 Removing Upper Ball Joint
1.
Remove steering knuckle as previously outlined.
2.
Position receiver tool J-34503-1 over top part of ball joint and adapter tool J-34503-3 onto C-clamp as shown.
3.
Tighten clamp and press ball joint from steering knuckle.
4.
To install, place tool J-34503-5 over replacement ball joint and receiver tool J-34503-12 onto C-clamp. Position tool against yoke shoulder, then
tighten clamp and press ball joint into knuckle.
5.
Install steering knuckle.
