jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Compressor HVAC > < Wheel Hub|Service and Repair|Page 1529
Page 1
background image

Blower Motor: Service and Repair

GRAND WAGONEER, J-10 & 20 TRUCK & 1980-83 CHEROKEE & WAGONEER

1. Disconnect battery ground cable.
2. Remove blower motor to housing retaining screws, then the blower motor.
3. Reverse procedure to install.

WITH AIR CONDITIONING

1. Disconnect battery ground cable.
2. Remove screws retaining evaporator assembly to instrument panel, then lower evaporator housing to gain access to blower motor attaching screws.
3. Disconnect blower motor electrical connector.
4. Remove blower motor retaining screws, then the blower motor.
5. Reverse procedure to install.

Compressor HVAC > < Wheel Hub|Service and Repair|Page 1529