jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Wiper Blade > < Threadmaker, Bond All GEL & Sealant - Application & Use|Page 1905
Page 1
background image

Wiper Switch: Service and Repair

1980-83 CHEROKEE & WAGONEER,
1984-85 GRAND WAGONEER,
1984-85 J-10 & J-20 TRUCK

1. Disconnect battery ground cable.
2. Locate small notch at base of switch knob, then insert a small screwdriver into notch to release knob from switch shaft.
3. Remove nut attaching front of switch to instrument panel.
4. Lower switch from rear of instrument panel, then disconnect electrical connector and remove switch.
5. Reverse procedure to install.

Wiper Blade > < Threadmaker, Bond All GEL & Sealant - Application & Use|Page 1905