Wrangler L4-150 2.5L VIN H TBI (1986)
Throttle Full Open Switch: Service and Repair
1.
Remove air filter, then disconnect throttle return spring.
2.
Disconnect throttle cable and cruise control cable, if equipped.
3.
Remove ISA bracket to throttle body attaching screws.
4.
Disconnect electrical connectors from WOT switch and ISA motor.
5.
Remove bracket, ISA and WOT assembly from throttle body.
6.
Remove ISA motor.
7.
Remove the two WOT switch to bracket attaching screws, then the switch.
8.
Reverse procedure to install.
