Wrangler L4-150 2.5L VIN H TBI (1986)
5. Remove O-ring from shift motor.
ASSEMBLY
1. Install new O-ring on motor.
2. Apply small amount of sealer around shift motor mounting hole and install shift motor and retaining nut.
3. Install shift fork assembly on pivot pin and thread shift fork pivot into shift motor shaft. Install E-clip on shift fork pivot pin.
INSTALLATION
1. Apply RTV sealant to axle cover sealing surfaces and install on axle. Shift fork and fork tabs must be engaged in shift collar before installing
cover bolts.
2. Torque axle housing cover bolts to 20 ft. lbs. Fill axle to bottom of fill plug hole with suitable gear lubricant and reconnect vacuum lines.
