Wrangler L4-150 2.5L VIN P MFI (1993)
Crankshaft Position Sensor: Specifications
TORQUE
Coolant Temperature Sensor ........................................................................................................................................................... 28 Nm (21 ft. lbs.)
Crankshaft Position Sensor .............................................................................................................................................................. 19 Nm (15 ft. lbs.)
Distributor Hold Down Bolt ............................................................................................................................................................ 23 Nm (17 ft. lbs.)
Engine Controller Mounting Screws ................................................................................................................................................... 1 Nm (9 in. lbs.)
Engine Controller Electrical Connector ............................................................................................................................................ 4 Nm (35 in. lbs.)
Ignition Switch Mounting Screws/Nuts ............................................................................................................................................ 4 Nm (35 in. lbs.)
Manifold Air Temp. Sensor ............................................................................................................................................................. 28 Nm (20 ft. lbs.)
Oxygen Sensor ................................................................................................................................................................................. 30 Nm (22 ft. lbs.)
Spark Plugs ...................................................................................................................................................................................... 37 Nm (27 ft. lbs.)
