Wrangler L4-150 2.5L VIN P MFI (1993)
If you have any questions or need assistance in completing this action, please contact your Zone Service Office.
CUSTOMER SATISFACTION NOTIFICATION -- ABS Brake Controller
Dear Jeep(R) Vehicle Owner:
Because the satisfaction of our customers is very important to Chrysler, we are requesting owners of certain 1993 and 1994 model Jeep(R) Wrangler
vehicles equipped with anti-lock brakes to return them to their dealers for a special service. Your vehicle, identified on the enclosed form, is affected.
The service and required parts as described in this letter will be provided free of charge.
The service is needed to prevent failure of an internal component in the Anti-lock Brake System (ABS) controller. This would cause a fuse to blow,
resulting in lighting of the yellow ABS lamp on the instrument panel and disabling the ABS system. The normal braking system will continue to operate
properly.
To correct the condition, your dealer will install a wiring jumper harness. The work will take about one-half hour to complete. However, additional time
may be required depending on how dealer appointments are scheduled and processed. To arrange for this free service:
Contact your dealer as soon as possible to schedule a service appointment.
Take the enclosed Owner Notification Form with you at the time of your appointment and give it to your dealer. The form identifies the vehicle and the
service that is required.
If you have any problem obtaining the needed service, please contact the Chrysler Zone Service Office in your area as shown in the listing on the reverse
side of this letter. A Zone representative will arrange for prompt servicing of your vehicle.
We regret any inconvenience that this action may cause you. However, we believe that this special service will help to ensure your continuing
satisfaction with your Jeep Wrangler.
Thank you for your attention to this important matter.
