jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Recall - Bulkhead Wiring Connector Defect|Page 3200 > < Recall - Bulkhead Wiring Connector|Page 3195
Page 1
background image

Multiple Junction Connector: All Technical Service Bulletins
Recall - Bulkhead Wiring Connector Defect

No. 572/573 
July, 1993

To: All Jeep & Eagle Dealers

Subject:
Safety Recall # 572 / Customer Satisfaction Notification # 573
Bulkhead Wiring Connector

Models:
Safety Recall # 572 -- 1991 through 1993 Model Year Jeep Wrangler (YJ)
Vehicles Equipped with a Manual Transmission Built Before February 23, 1993.

Customer Satisfaction Notification # 573 -- 1991 through 1993 Model Year Jeep Wrangler (YJ) Vehicles Equipped with an Automatic Transmission
Built Before February 23, 1993.

Salt tracking between the starter solenoid wire and the adjacent battery feed wire in the bulkhead connector may bypass the key control of the starter
motor solenoid circuit and cause the starter to engage without ignition key initiation. This may cause vehicles equipped with a manual transmission and
parked in gear to move without warning due to engine cranking. To correct the condition, the starter solenoid wiring must be relocated within the
bulkhead connector.

IMPORTANT:
Some of the involved vehicles may be in dealer inventory. Federal law requires you to complete this recall service on these vehicles before retail
delivery.

Details of this service action are explained in the following sections.

Service Procedure Videotape

No videotape of the service procedure for this recall will be provided.

Dealer Notification & Vehicle List

Involved dealers:
Each dealer to whom involved vehicles were invoiced (or the current dealer at the same street address) will receive a copy of this dealer recall
notification letter and a list of the involved vehicles by Certified Mail.

Important:
Dealer notification by Certified Mail is required by federal law for all safety recalls. Responsible dealership personnel should be instructed to sign for
this Certified Mail without hesitation as it concerns urgent safety recall information.

The Vehicle List is arranged in Vehicle Identification Number (VIN) sequence. Owners known to Chrysler are also listed. The lists are for dealer
reference in arranging for service of involved vehicles.

All dealers:
Each Jeep & Eagle dealer will receive a copy of this dealer recall notification letter by first class mail.

DIAL System Function 70

All involved vehicles will be entered to DIAL System Function 70 at the time of recall implementation for dealer inquiry by VIN as needed.

Parts

No parts are required for this service action.

Owner Notification and Service Scheduling

All involved vehicle owners known to Chrysler are being notified of the service requirement by first class mail. They are requested to schedule
appointments for the service with their dealers at the earliest possible date. A copy of the owner notification letter is included.

Enclosed with each owner notification is an Owner Notification Form. The involved vehicle and recall are identified on the form for owner or dealer
reference as needed.

Recall - Bulkhead Wiring Connector Defect|Page 3200 > < Recall - Bulkhead Wiring Connector|Page 3195