Wrangler L4-150 2.5L VIN P MFI (1993)
-
steering dampener - 71 N.m (53 ft. lbs.) torque;
-
shock absorbers -61 N.m (45 ft. lbs.) torque;
-
stabilizer bar links - 61 N.m (45 ft. lbs.) torque;
-
drag link - 47 N.m (35 ft. lbs.) torque;
-
front drive shaft - 19 N.m (14 ft. lbs.) torque.
(6) Connect the axle vent hose and the axle shift motor vacuum harness (Fig. 2).
(7) Install the disc brake rotors, pads, calipers and the wheels/tires. See: Brakes and Traction Control/Disc Brake System Tighten the wheel lug nuts
with 102 N.m (75 ft. lbs.) torque.
(8) Remove the floor jack and the supports.
(9) Lower the vehicle.
(10) Spring shackle bolt/nut: 129 N.m (95 ft. lbs.) torque.
Track bar-to-frame bracket bolt/nut: 168 N.m (125 ft. lbs.) torque.
Track bar-to-axle shaft tube bracket bolt/nut: 100 N.m (74 ft. lbs.) torque. Spring eye-to-frame bracket bolt/nut: 142 N.m (105 ft. lbs.) torque.
(11) Check the front wheel alignment and the outside-wheel turning angles. Adjust the front wheel alignment, if necessary.
