Wrangler L4-2.4L VIN 1 (2006)
Combination Flasher
1. Align the combination flasher terminals with the terminals in the connector on the back of the left multi-function switch housing.
2. Push on the combination flasher until the terminals are fully seated in the left multi-function switch connector.
3. Position the upper shroud onto the steering column .
4. Install and tighten the screws that secure the lower steering column shroud to the upper shroud. Tighten the screws to 2 Nm (18 in. lbs.).
5. Move the tilt steering column to the fully raised position and secure it in place by moving the tilt release lever back to the locked position.
6. Reinstall the steering column opening cover.
7. Reconnect the battery negative cable.