Wrangler L4-2.4L VIN 1 (2006)
10.
Route the new drive belt around the top left idler pulley and slowly let the tensioner arm rotate into the drive belt.
NOTE:
Belt tension is not adjustable. Belt adjustment is maintained by the automatic (spring loaded) drive belt tensioner.
11.
Verify that the new drive belt is seated properly to all pulleys.
12.
If present, remove the old under hood accessory drive belt instruction label from the vehicle engine compartment.
13.
Connect the negative battery cable to the battery.
14.
Set the clock to the correct time.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.
