Wrangler L6-4.0L VIN S (2000)
Speaker: Service and Repair
Speaker Replacement
WARNING: ON VEHICLES EQUIPPED WITH AIR-BAGS, REFER TO AIR BAGS AND SEAT BELTS/AIR BAGS BEFORE
ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE.
FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIR-BAG DEPLOYMENT AND POSSIBLE
PERSONAL INJURY.
REMOVAL
Instrument Panel Speaker
1. Disconnect and isolate the battery negative cable.
Instrument Panel Speaker Bezel Removal/Install
2. Remove the two screws that secure the outboard end of the speaker bezel to the instrument panel.
3. Using a trim stick or another suitable wide flat-bladed tool, gently pry at the top and bottom edges of the speaker bezel to release the two snap clip
retainers that secure the bezel to the instrument panel.
4. Remove the speaker bezel from the instrument panel.
Instrument Panel Speaker Remove/Install
5. Remove the four screws that secure the speaker to the instrument panel armature.
