Wrangler L6-4.0L VIN S (2000)
Cowl Moulding / Trim: Service and Repair
COWL GRILLE AND SCREEN
REMOVAL
1. Remove the wiper arms.
CAUTION: Use masking tape or equivalent on the wiper arm pivots to prevent damage to the cowl grille paint.
2. Remove the four screws at the rear of the cowl grille.
Fig. 1
3. Open the hood and remove the screws that attach the cowl grille and screen to the cowl (Fig. 1).
4. Remove the grille and screen from the cowl.
INSTALLATION
NOTE: When installing the cowl grille, ensure the snorkels on the cowl are positioned correctly and in good condition. Misaligned or damaged seals
may allow water to enter the HVAC.
1. Position the cowl screen and grille on the cowl.
2. Install the screws that attach the grille and screen to the cowl.
3. Remove the tape from the wiper pivots and install the wiper arms.