Wrangler L6-4.0L VIN S (2000)
Front Door Window Glass Weatherstrip: Service and Repair
Glass Run Channel
GLASS RUN CHANNEL
REMOVAL
1. Lower the window.
2. Using a trim stick C-4755 or equivalent, carefully pry the glass run channel weatherstrip from the window opening frame.
3. Remove the door glass.
Fig. 8
4. Grasp the glass run channel weatherstrip in the door (Fig. 8) and pull from the channel.
INSTALLATION
NOTE: Applying a small amount of lubricant to the weatherstrip may ease the installation.
1. Position the weatherstrip in the lower door channels and press into place.
2. Install the door glass.
3. Position the weatherstrip in the window opening frame and press into place.
NOTE: Ensure that the glass is seated properly. Improperly seated door glass will result in high glass roll-up/roll-down effort.