Wrangler L6-4.0L VIN S (2000)
Blower Motor Resistor: Description and Operation
BLOWER MOTOR RESISTOR
The blower motor resistor is mounted to the bottom of the heater-A/C housing on the passenger side of the vehicle under the instrument panel. It
can be accessed for service by removing the heater-A/C housing kick cover.
The resistor has multiple resistor wires, each of which reduce the current flow to the blower motor, to change the blower motor speed. The blower
motor switch directs battery current to the correct resistor wire to obtain the selected speed. When the highest blower motor speed is selected, the
blower motor relay connects the blower motor directly to battery current, bypassing the blower motor resistor.
The blower motor resistor cannot be repaired and, if faulty or damaged, it must be replaced.
