Wrangler L6-4.0L VIN S (2000)
2. Position the engine-to-body ground strap eyelet over the stud on the left upper rear corner of the engine cylinder head.
3. Install and tighten the nut that secures the engine-to-body ground strap eyelet to the stud on the left upper rear corner of the engine cylinder head.
Tighten the nut to 5.6 Nm (50 in. lbs.).
4. Install and tighten the screw that secures the engine-to-body ground strap eyelet to the dash panel. Tighten the screw to 48.5 Nm (430 in. lbs.).
5. Install and tighten the screw that secures the engine-to-body ground strap eyelet to the hood panel center reinforcement. Tighten the screw to 1.9
Nm (17 in. lbs.).
Engine-To-Frame Ground Strap
1. Position the engine-to-frame ground strap into the engine compartment. The ground strap eyelet with a 45 degree bend in it is to be mounted on
the right frame rail.
2. Install and tighten the screw that secures the engine-to-frame ground strap eyelet to the top of the right frame rail. Tighten the screw to 22.6 Nm
(200 in. lbs.).
3. Install the engine-to-frame ground strap eyelet over the forward ignition coil mounting stud on the right side of the engine.
4. Install and tighten the nut that secures the engine-to-frame ground strap eyelet to the forward ignition coil mounting stud on the right side of the
engine. Tighten the nut to 22.6 Nm (200 in. lbs.).
