jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

ABOUT US
Idle Air Control Motor <--> [Idle Up Control Valve] > < Idle Air Control (IAC) Motor <--> [Idle Speed/Throttle Actuator - Electronic]|Specifications|Page 2849

Wrangler L6-4.0L VIN S (2000)

Page 2
background image

3. Remove two mounting bolts (screws).
4. Remove IAC motor from throttle body.

INSTALLATION

1. Install IAC motor to throttle body.
2. Install and tighten two mounting bolts (screws) to 7 N.m (60 in. lbs.) torque.
3. Install electrical connector.
4. Install air cleaner tube to throttle body.

Idle Air Control Motor <--> [Idle Up Control Valve] > < Idle Air Control (IAC) Motor <--> [Idle Speed/Throttle Actuator - Electronic]|Specifications|Page 2849