Wrangler L6-4.0L VIN S (2000)
3. Remove the plastic horn switch feed wire retainer(s) from the stud(s) on the back of the driver side airbag housing.
Driver Side Airbag Trim Cover Retainers Remove/Install - w/o Speed Control
Driver Side Airbag Trim Cover Retainers Remove/Install
4. Remove the four nuts that secure the upper and lower trim cover retainers to the studs on the back of the driver side airbag housing.
5. Remove the upper and lower trim cover retainers from the airbag housing studs.
6. Remove the horn switch ground wire eyelet from the upper airbag housing stud.