Wrangler 2WD V6-3.8L (2008)
5. Disconnect the electrical connector.
6. Remove the mounting fasteners in the left side of the instrument panel.
7. Remove the speaker mounting fasteners.
8. Remove the speaker (2) by carefully pulling the left side of the instrument panel outward until there is sufficient room to remove the speaker
through the end cap area.
INSTRUMENT PANEL SPEAKER - PASSENGER
1. Disconnect the battery negative cable.
2. Remove the glove box.
3. Remove the instrument panel end cap.
4. Disconnect the electrical connectors.
5. Remove the speaker mounting fasteners.
6. Remove the speaker.
SOUND BAR
1. Disconnect the battery negative cable.
2. Remove the mounting fasteners and remove the speaker cover grille.
3. Remove the speaker.
4. Disconnect the electrical connector.
SUBWOOFER