Wrangler 2WD V6-3.8L (2008)
1. Install the latch screws (4) and tighten to 8 Nm (71 in. lbs.) top screws first.
2. Install the outside door handle nut (2) through the hole in the inner door and tighten to 4.5 Nm (40 in. lbs.).
3. Connect the electrical connector (3).
4. Connect the rods (5) and seat the clips fully.
5. Install the trim panel (2), See: Front Door Panel/Service and Repair/Front Door Trim Panel - Installation.