Wrangler 2WD V6-3.8L (2008)
1. Install the handle (1) and install the nuts (4) and (2).
2. Tighten the nuts to, 4.5 Nm (40 in. lbs.).
3. Install the trim panel (1), See: Rear Door Panel/Service and Repair/Rear Door Trim Panel - Installation.
1. Install the handle (1) and install the nuts (4) and (2).
2. Tighten the nuts to, 4.5 Nm (40 in. lbs.).
3. Install the trim panel (1), See: Rear Door Panel/Service and Repair/Rear Door Trim Panel - Installation.