Wrangler 2WD V6-3.8L (2008)
Rear Door Hinge: Service and Repair
Rear Door Hinge - Installation
Full Rear Door
INSTALLATION
NOTE: A suitable body sealant should be used when removing or moving the hinges.
1. Install the door hinges (2) and (3), and install the bolts (1) and (4).
2. Align the hinges to the door using the reference marks made during the removal procedure and tighten the bolts to 26 Nm (19 ft. lbs.).
3. Install the body hinges (1) and (4), and install the bolts (2) and (3).
4. Align the hinges to the body using the reference marks made during the removal procedure and tighten the bolts to 28 Nm (21 ft. lbs.).