Wrangler 2WD V6-3.8L (2008)
surfaces (area that holds striker). Evenly coat the entire area of the catch plate striker contact surfaces.
NOTE:
All areas of the latch plate that contact the striker must be lubricated.
4.
Using the door handle, open the door latch.
5.
Close and open the door 3 or 4 times to distribute the grease.
6.
Examine door striker and underside of latch catch to ensure complete lubricant coverage.
7.
Wipe any excess grease from the striker.
8.
Repeat the lubrication process on the other door(s).
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.